For decades there seemed to be just one single efficient solution to store data on a pc – working with a hard drive (HDD). Having said that, this sort of technology is by now demonstrating it’s age – hard drives are noisy and slow; they are power–hungry and tend to produce a lot of heat throughout intensive operations.
SSD drives, alternatively, are fast, use up much less energy and tend to be far less hot. They furnish a new method to file accessibility and storage and are years in front of HDDs relating to file read/write speed, I/O operation as well as energy capability. Find out how HDDs fare against the more recent SSD drives.
1. Access Time
SSD drives offer a completely new & innovative approach to data safe–keeping using the utilization of electronic interfaces in place of just about any moving components and turning disks. This innovative technology is much quicker, making it possible for a 0.1 millisecond file accessibility time.
HDD drives rely on rotating disks for files storage uses. When a file will be utilized, you will have to wait around for the correct disk to get to the correct place for the laser beam to access the data file in question. This translates into a common access speed of 5 to 8 milliseconds.
2. Random I/O Performance
Due to the new radical file storage strategy embraced by SSDs, they have better file access rates and quicker random I/O performance.
All through our tests, all of the SSDs revealed their ability to deal with at the very least 6000 IO’s per second.
With a HDD drive, the I/O performance steadily enhances the more you apply the drive. Even so, once it extends to a particular cap, it can’t get speedier. And due to the now–old concept, that I/O limitation is noticeably lower than what you could receive having an SSD.
HDD are only able to go as far as 400 IO’s per second.
SSD drives don’t have any kind of moving elements, which means there is significantly less machinery within them. And the fewer actually moving parts you can find, the fewer the chances of failing are going to be.
The regular rate of failing of an SSD drive is 0.5%.
With an HDD drive to function, it must rotate two metal disks at more than 7200 rpm, holding them magnetically stabilized in the air. They have a lot of moving parts, motors, magnets and also other tools crammed in a small space. Consequently it’s no wonder that the common rate of failure of an HDD drive ranges among 2% and 5%.
4. Energy Conservation
SSDs are lacking moving components and need little or no cooling down energy. They also need a small amount of power to function – tests have established that they can be operated by a regular AA battery.
As a whole, SSDs consume somewhere between 2 and 5 watts.
HDD drives are well known for being noisy; they’re at risk from overheating and if you have several disk drives in a single server, you must have an additional a / c unit just for them.
As a whole, HDDs use up between 6 and 15 watts.
5. CPU Power
SSD drives permit speedier data access speeds, which will, in return, allow the processor to finish file queries much quicker and to go back to additional tasks.
The regular I/O wait for SSD drives is actually 1%.
By using an HDD, you have to spend more time watching for the outcomes of one’s data file query. It means that the CPU will remain idle for additional time, looking forward to the HDD to respond.
The standard I/O wait for HDD drives is approximately 7%.
6.Input/Output Request Times
Almost all of LenSoft’s brand–new servers are now using only SSD drives. Our very own tests have shown that with an SSD, the common service time for an I/O request although running a backup stays below 20 ms.
In comparison with SSD drives, HDDs feature much slower service rates for input/output demands. Throughout a server backup, the regular service time for any I/O call ranges somewhere between 400 and 500 ms.
7. Backup Rates
You can check out the real–world potential benefits to utilizing SSD drives day after day. As an example, on a hosting server with SSD drives, a complete data backup will take simply 6 hours.
In the past, we’ve got used primarily HDD drives with our machines and we’re well aware of their overall performance. On a server equipped with HDD drives, an entire hosting server backup will take around 20 to 24 hours.
To be able to quickly raise the overall performance of your sites while not having to alter just about any code, an SSD–powered hosting service is a good choice. Have a look at the shared web hosting plans packages and then the VPS web hosting plans – our solutions highlight swift SSD drives and are offered at reasonable prices.
- Live Demo
- Sign up today. There won’t be installation charges and you’ll have total root/administrator access to your server. 99.9% network availability is warranted.
Compare our prices
- Quickly examine the parameters and tools provided by LenSoft’s Virtual Private Servers. Discover exactly which VPS Web Hosting package will provide you with precisely what you’ll need to handle your multi–media web presence easily.
- Compare our hosting plans
- Get in touch with us 24/7/365 by email or by employing the extremely–fast ticketing platform. Our techs are going to respond to any of your questions within just 60 mins.